Geartech: How to avoid the high temperature of the conveyor belt on the production line manufacturer

The conveyor belt used in the industrial production of the production line manufacturer is in continuous contact with the idler and the continuous process will generate high temperature. The longer the higher temperature is, the longer it will cause the function of the production line manufacturer. The temperature of the conveyor belt joint can have the highest limit, which generally does not exceed the normal maximum limit. Of course, the maximum temperature that different conveyor belts can accept is different, and the environment is also limited. In open places, the conveyor belt will heat up when exposed to direct sunlight. In this scenario, the surface of the conveyor belt will heat up. Heat dissipation will be faster than in a closed workshop. Even if the maximum acceptable temperature is not reached, there will be adverse effects on the long-term use of the transport.

       It can be seen from the above that even if the maximum specified temperature for transportation is not reached, it is impossible if it is too close. The extra temperature of the rubber conveyor belt is determined by both the rubber vulcanizing agent and the added accelerator. Most of the idler manufacturers generally set the temperature of the vulcanized components used in the conveyor belt to be higher in order to ensure the high safety of the products they produce. In this way, when the extreme temperature occurs again, the transport will not collapse at a touch, and it can withstand long-term heat resistance and maintain normal conditions.

       Of course, it is also necessary to improve the processing technology of transportation. The vulcanizing agent material is one aspect, and the process of processing the idler technology is also not to be underestimated. Measures to extend the vulcanization time at the participating point in the production process can easily ensure a higher level. For the maintenance of the conveying function, it is recommended to use the idler as much as possible in an industrial base with room temperature or a slightly lower temperature. Integrating the production process, a variety of workstations can be arranged on the production line manufacturer, and the assembly line can meet the production needs; high scalability, according to the needs of the factory, the assembly line that meets the production needs of the product can be designed; the production cost of the factory can be saved, and production workers can be saved to a certain extent Quantity, to achieve a certain degree of automatic production, the initial investment is not large, and the rate of return is high; the characteristics of the assembly line work are highly specialized. The technological process is closed, the working places are arranged in the technological sequence, and the labor objects move in one direction between the working procedures. The processing time of each working procedure is the same as the number of working places of each working procedure, etc., and each working procedure is produced according to the same rhythm. . The so-called beat refers to the production time interval of two adjacent finished products.​​

Instructions for the operation of the assembly line:

1. Brief electrical operation: the power supply of the Shenzhen assembly line must be three-phase and four-wire, and a main switch is installed on the surface of the Shenzhen assembly line. , carefully must not pass the zero line of the second connection method through another switch). 2. The method of starting the motor is to turn on the power first. At this time, all three power indicator lights will be on, confirming that the three-phase power supply has reached the distribution box. At this time, you can press the blue button of the motor to start the motor. If it can't start, you can open the door of the distribution box to see if the second DZ108 switch in the first row is long in red and short in blue. If you don't press the blue one down. After the motor is started, then turn on the switch of the assembly line speed regulator, and then slowly adjust the potentiometer of the speed regulator up to make the speed express to the desired speed. When shutting down, first slowly introduce the potentiometer of the speed controller to the assembly line. Introduction to the definition of operation instructions The maintenance assembly line is a continuous conveying of goods handling machinery on a certain line, also known as a conveyor line or a conveyor. The production line manufacturer Xiaobian wants to talk about the origin of the assembly line, the definition of operation instructions, and maintenance. According to the conveying series products, it can be roughly divided into: belt assembly line, plate chain line, multiple chain line, plug-in line, mesh belt line, suspension line and roller assembly line. Seven types of pipelines. Commonly include traction parts, load bearing members, drive assemblies, tension assemblies, redirection assemblies and supports, etc. The assembly line has large conveying capacity and long transportation distance, and can also complete several technological operations at the same time during the conveying process, so it is widely used. All the way to the production line manufacturers to understand the relevant knowledge content